Abrading Methods Lapping

Lapping Company

Lapping Home
What Is Lapping
Lapping Company
About Lapping

Lapping Services
Lapping Flat Honing
Lapping Fine Grinding
Lapping Samples

Lapping Links
Lapping contact
Report Spam

Flat Lapping Experts

HyMu 80 Metal Component Caps
Lapping

The Challenge:
Lap one side to achieve the thickness requirement without bending the thin cross section (.009"). No burrs visible at 30x magnification. Must be contaminate free. Hold 1.33 CpK

Part Specifications

Material HyMu 80 Metal
Previous Operation Stamping
Dimensions .210"W x .410"L x .130"H x .009" thk

Pre-machined Condition

Thickness (Height) .146 ~ .148"
Surface Finish As Trimmed
Flatness Flat to .0003" concave
Parallelism Not Measured
Presentation Stamped and bulk-packed
prior to shipping

Results:

Thickness .130" .0005" (1.33 CpK)
Surface Finish N/A
Flatness .0001"
Parallelism .0005"
Notes Exceeded customer expectations for delivery, consistency,
Q.C., and data provided
 

lapping.com and the editorial content, graphics, and products of the lapping.com website, unless otherwise noted, are the products of Abrading Methods, Inc. The information presented on lapping.com is copyrighted as collective work. Any unauthorized reproduction, by any means, mechanical or electronic, without the express written permission of Abrading Methods, Inc is strictly prohibited.

Copyright 2007. Abrading Methods, Inc.
All Rights Reserved