Abrading Methods Lapping

Lapping Company

Lapping Home
What Is Lapping
Lapping Company
About Lapping

Lapping Services
Lapping Flat Honing
Lapping Fine Grinding
Lapping Samples

Lapping Links
Lapping contact
Report Spam

Flat Lapping Experts

Cast Iron, Large Parts
Lapping

The Challenge:
Lap one side, when opposite side is tapered, irregular, and not useable for a reference surface.

Part Specifications

Material Gray Cast Iron
Previous Operation Milling (Fly Cut)
Dimensions 28.00" L x 6.00" W x 3.00 H,
Back side is a poor reference surface due to features and taper.

Pre-machined Condition

Thickness N/A
Surface Finish 300Ra
Flatness .003"
Parallelism N/A
Presentation 57lbs. each

Results:

Thickness Stock Removal .005" to clean up
Surface Finish 20Ra Max
Flatness .0005"
Parallelism N/A
Notes Exceeded customer expectation for finish quality, flatness, and speed of delivery.
 

lapping.com and the editorial content, graphics, and products of the lapping.com website, unless otherwise noted, are the products of Abrading Methods, Inc. The information presented on lapping.com is copyrighted as collective work. Any unauthorized reproduction, by any means, mechanical or electronic, without the express written permission of Abrading Methods, Inc is strictly prohibited.

Copyright 2007. Abrading Methods, Inc.
All Rights Reserved